Xadow - IMU 9DOF


Xadow - IMU 9DOF is a high performance 9-axis motion tracking module,which is base on MPU-9150.The MPU-9150 is the world's first integrated 9-axis motion tracking device designed for the low power, low cost, and high performance requirements of consumer electronics equipment including smartphones, tablets and wearable sensors .MPU-9150 features three 16-bit ADC for digitizing the gyroscope outputs and three 16-bit ADCs for digitizing the accelerometer outputs and three 13-bit ADCs for digitizing the magnetometer outputs.




Specification




Interface Function


Address is 0x68: R4 is not soldered.
Address is 0x69: R5 is not soldered.

Usage

Based on library,we can display value of Accle&Gyro&Magnet on serial monitor.Now let's show how to use the module.

Hardware Installation

Hardware instration is very easy,It can connect to Xadow - Main Board by FPC cable.




Software Part


In static state,the z-Axis output value is about 0.98g,so you can refer to this to test if your sensor can work normally.
Orientation of Axes
The diagram below shows the orientation of the axes of sensitivity and the polarity of rotation.




Resource

Eagle File

PDF File

Datasheet

Copyright (c) 2008-2016 Seeed Development Limited (www.seeedstudio.com / www.seeed.cc)
This static html page was created from http://www.seeedstudio.com/wiki