Service for Fusion PCB

Description

Please read though this page before using fusion PCB service. The price will be calculated based on your options.

About PCB service

As hobbyists ourselves, we organize local mfg power, panelize designs, reduce the shipping cost, and ensure the quality. It will be a source to sustain our studio along with other services we provide.

Fusion PCB Order Steps

  1. Purchase fusion PCB Service from depot and check out.
  2. An order number will be provided in confirmation email from Seeed Studio Depot(order@seeedstudio.com)
  3. Send the Gerber file to pcb@seeedstudio.com with the order number in title.

If the file and design meets requirements, they will be processed and shipped in 4-6 days (Excluding the Chinese Festival).

Gerber file requirement

The following layers are needed:

PCB design tips

SINGLE DESIGN, NO PANELIZING
Note:

Available Quantity option: 10pcs, 50pcs, 100pcs
THE MINIMAL QUANTITY WE CAN START HERE IS 10pcs.
Note: If you want to order more than 10pcs, please do check the price for different options and choose the most economic one.
Example: For PCB size (50mm X 100mm), 4 × 10pcs option cost more than 1 × 50pcs option.

Fusion PCB capabilities

(Green is free, other need extra 10$)


Available Maximum Size: 50mm X 50mm, 50mm X 100mm, 50mm X 150mm, 50mm X 200mm, 100mm X 100mm, 100mm X 150mm, 100mm X 200mm, 150mm X 150mm, 150mm X 200mm, 200mm X 200mm
Note: The PCB dimension (both length and width) must be within the PCB size option
Example: PCB design: 30mm X 60mm Option: 50mm X 50mm X 50mm X 100mm √
PCB design: 101mm X 40mm Option: 100mm X 50mm X 150mm X 50mm √
PCB design: 70mm X 70mm Option: 50mm X 150mm X 100mm X 100mm √

Available Board Thickness: 0.8mm, 1.0mm, 1.2mm, 1.6mm, 2.0mm
(The costs of 0.8mm, 1.0mm, 1.2mm, and 1.6mm are same)

Thickness Tolerance: (t≥0.8mm) ± 10%

Thickness Tolerance: (t<0.8mm) ± 10%

Insulation Layer Thickness: 0.075mm--5.00mm

Minimum Line: 6mil

Minimum Space: 6mil

Out Layer Copper Thickness: 1oz (35um)

Inner Layer Copper Thickness: 17um—100um

Drilling Hole (Mechanical): 0.3mm—6.35mm

Finish Hole (Mechanical): 0.3mm—6.30mm

Diameter Tolerance (Mechanical): 0.08mm

Registration (Mechanical): 0.09mm

Aspect Ratio: 8:1

Solder Mask Type: Photosensitive ink

SMT min Solder Mask Width: 0.1mm

Min Solder Mask Clearance: 0.1mm

Plug Hole Diameter: 0.25—0.60mm

Surface Finish: HASL, HASL (Lead Free) +$5, ENIG+$10.

E-TEST: 50% e-test, 100% e-test +$10 50% e-test (Tested PCB will have a mark on the PCB edge). 100% e-test optional for extra 10$

Eagle Design Rule: click to download.

Copyright (c) 2008-2016 Seeed Development Limited (www.seeedstudio.com / www.seeed.cc)
This static html page was created from http://www.seeedstudio.com/wiki