Grove - Temperature&Humidity Sensor (HDC1000)

Grove - Temperature&Humidity Sensor (HDC1000) utilizes a HDC1000 sensor.HDC1000 was designed by Texas Instruments.It is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power.The device measures humidity based on a novel capacitive sensor.The humidity and temperature sensors are factory calibrated.The innovative WLCSP (Wafer Level Chip Scale Package) simplifies board design with the use of an ultra-compact package. The sensing element of the HDC1000 is placed on the bottom part of the device, which makes the HDC1000 more robust against dirt, dust, and other environmental contaminants. The HDC1000 is functional within the full –40°C to +125°C temperature range,and 0-100% RH range.



Features

Specification

Item Min Typical Max Unit
Supply Voltage 3 / 5 VDC
Working Current 0.12 / 90 uA
Relative Humidity Accuracy (Typ) / ±3  %RH
Relative Humidity Operating Range (Typ) 0 / 100  %RH
Temperature Accuracy / ±0.2 /
Temperature Range -40 / 125
Operating Temperature Range -20 / 85
Dimension 40*20 mm

Interface Function

  1. Grove connector.
  2. Ready:Ready for a conversion.
  3. Default address:0x40.
  4. ADDR0,ADDR1:I2C Serial Bus Address Configuration(0x40,0x41,0x42,0x43)

Get started

with Arduino

Here is how to use Grove - Temperature&Humidity Sensor (HDC1000) with Seeeduino Lotus.

Hardware Installation

  1. Part lists: Seeeduino Lotus v1.0 or other Microcontroller development board that combination of Seeeduino.Grove - Temperature&Humidity Sensor (HDC1000).
  2. Hardware linking is very easy.Grove - Temperature&Humidity Sensor (HDC1000) communicate over I2C.Connecting Grove - Temperature&Humidity Sensor (HDC1000) and Seeeduino Lotus v1.0 by Grove cable,as the following.


Software Part

  1. To download the demo code in github, click here.
  2. To install Arduino Library, please click here
  3. Open the HDC1000 example sketch
  4. In the Tools > Board menu, select right board and serial port.
  5. Upload demo code to Seeeduino Lotus v1.0.

We can get the temperature and relative humidity information from the serial terminal

with Launchpad

Material required

Hardware connections

Download code and flash it to Launchpad

1. Download demo codes.

Note that you have to copy the file readTempHumi.ino(under folder examples) into same folder with file HDC1000.h

2. Flash the codes to Lauchpad.
3. Open Serial Monitor(Tool>Serial Monitor) to view data detected.

Resources

File:Grove - Temperature&Humidity Sensor(HDC1000) v1.0 sch pcb.zip
File:Grove - Temperature&Humidity Sensor(HDC1000) v1.0 sch.pdf
Demo code
HDC1000_DataSheet.pdf

Copyright (c) 2008-2016 Seeed Development Limited (www.seeedstudio.com / www.seeed.cc)
This static html page was created from http://www.seeedstudio.com/wiki