Bugduino

Bugduino is an Arduino compatible module.
Designed for working with Buglabs BUG platform.

Features

• Arduino compatible, based on Seeeduino
• BUG connector
• USB to Uart: FT232RL
• ATmega328 microcontroller
• Input voltage - 7-12V
• 14 Digital I/O Pins (6 PWM outputs)
• 8 Analog Inputs
• 32k Flash Memory
• 16Mhz Clock Speed

Application Ideas

• Application1
• Application2
• Application3

Cautions

The warnings and wrong operations possible cause dangerous.

Schematic

1. File:BUGduinoSchematicPDF.pdf

Specifications

Pin definition and Rating

Mechanic Dimensions

60.2mm * 60.2mm * 20.5mm

Usage

Hardware Installation

1. Toggle Serial Switch to USB side;
2. Plug USB cable;
3. Select the Corresponding COM port in Arduino IDE;
4. Select "Arduino Duemilanove or Nano w/ ATmega328" in Arduino Board menu;
5. click the upload bottom in Arduino IDE;

Programming

#include <Wire.h>
 
//SLOTS: Vendor:  0x02
//SLOTS: Product  0x10
//SLOTS: Revision 0x20
//A0-->GND, A1-->GND, A2-->GND
#define AT24C02B_Addr  0b1010000
 
unsigned char bugduino_signature[]=
{
  0x00,0x00,0x02,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0b,0x16,0x00,0x00,0x00,0x0f
};
unsigned char address_map[]=
{
  0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,0x7f
};
 
void setup()
{
  Wire.begin();
  Serial.begin(38400);
}
void loop()
{
  /* 
   */
  unsigned char i = 0;
  unsigned char eeprom = 0;
  for(i=0;i<20;i++)
  {  
    Wire.beginTransmission(AT24C02B_Addr); //start
    Wire.send(address_map[i]);
    Wire.endTransmission();    //stop
    Wire.requestFrom(AT24C02B_Addr, 1);    // request
    delay(1);
    while(Wire.available())    // slave may send less than requested
    { 
      unsigned char c = Wire.receive(); // receive a byte as character
      if(c != bugduino_signature[i])
      {
        eeprom =1;
      }
    }
  }
  delay(100);
 
  if(eeprom)
  {
    Serial.println("Write Signature");
    for(i=0;i<20;i++)
    {
      Wire.beginTransmission(AT24C02B_Addr); //start
      Wire.send(address_map[i]);
      Wire.send(bugduino_signature[i]);
      Wire.endTransmission();    //stop
      delay(10);
    }
  }
  else
  {
    Serial.println("Signature OK");
  }
  for(;;);
}

Example

The projects and application examples.

Bill of Materials (BOM) /parts list

All the components used to produce the product.

FAQ

Support

If you have questions or other better design ideas, you can go to our forum or wish to discuss.

Version Tracker

Bug Tracker

Bug Tracker is the place you can publish any bugs you think you might have found during use. Please write down what you have to say, your answers will help us improve our products.

Additional Idea

The Additional Idea is the place to write your project ideas about this product, or other usages you've found. Or you can write them on Projects page.

How to Buy

See Also

• Microcontrollers

Licensing

This documentation is licensed under the Creative Commons Attribution-ShareAlike License 3.0 Source code and libraries are licensed under GPL/LGPL, see source code files for details.

External Links

Links to external webpages which provide more application ideas, documents/datasheet or software libraries

This static html page was created from http://www.seeedstudio.com/wiki