This is an aluminum servo bracket for RB-421 Servoes.With this kit and two RB-421 servos(http://www.seeedstudio.com/depot/rb421-servo-2-pcs-pack-p-652.html?cPath=77), you can build a 2 degrees freedom Servo mount assembly.
This kit would be potentially useful for steering a small camera, antenna, laser pointer or other device for 180° of rotation side to side and front to back.
These parts also have holes at 20mm spacings so they can be attached to Seeed (http://www.seeedstudio.com/depot/starter-bundle-harness-p-906.html?cPath=178_184)Starter Bundle Harness which also has 20mm spacings as well.
Model: [the-link-on-Bazaar Model-number]
| Devic | Value | Manufacturer | Details（size:mm) |
|---|---|---|---|
| Bracket(10031R0) | 2 | ||
| Yoke(10032R0) | 1 | ||
| Flange Bearing | 1 | 3*8*4 | |
| Screw | 8 | PM4*8 | |
| Screw | 8 | PA2*6 | |
| Screw | 2 | PM3*8 | |
| Screw | 10 | PM2*5 | |
| Screw | 10 | PM2.5*6 | |
| Nut | 8 | M4 | |
| Nut | 10 | M2 | |
| Nut | 10 | M2.5 |
If you have questions or other better design ideas, you can go to our forum or wish to discuss.
| Revision | Descriptions | Release |
|---|---|---|
| v0.9b | Initial public release | 13,Sep,2011 |
http://www.seeedstudio.com/depot/bracket-for-rb421-servo-p-939.html?cPath=170_172
Other related products and resources.
This documentation is licensed under the Creative Commons Attribution-ShareAlike License 3.0 Source code and libraries are licensed under GPL/LGPL, see source code files for details.
Copyright (c) 2008-2016 Seeed Development Limited (www.seeedstudio.com / www.seeed.cc)