This is a custom solar panel, which mates directly with many of our development boards and has a high efficiency at 15.5%. Unit has a clear epoxy coating with hard-board backing. Robust sealing for out door applications!
Model: POW111D2P
http://www.seeedstudio.com/depot/images/product/solarb.jpg
| PET | package |
|---|---|
| Typical peak power | 0.935W |
| Voltage at peak power | 5.5v |
| Current at peak power | 170mA |
| Length | 100 mm |
| Width | 75 mm |
| Depth | 1.5 mm |
| Weight | 33g |
| Efficiency | 15.5% |
| Wire diameter | 1.5mm |
| connector | 2.0mm JST |
Please list your question here:
If you have questions or other better design ideas, you can go to our forum or wish to discuss.
| Revision | Descriptions | Release |
|---|---|---|
| v1.0 | Initial public release | May 27, 2010 |
Bug Tracker is the place you can publish any bugs you think you might have found during use. Please write down what you have to say, your answers will help us improve our products.
The Additional Idea is the place to write your project ideas about this product, or other usages you've found. Or you can write them on Projects page.
Click here to buy: http://www.seeedstudio.com/depot/1w-solar-panel-75x100-p-633.html?cPath=155.
This documentation is licensed under the Creative Commons Attribution-ShareAlike License 3.0 Source code and libraries are licensed under GPL/LGPL, see source code files for details.
Copyright (c) 2008-2016 Seeed Development Limited (www.seeedstudio.com / www.seeed.cc)